0
You have no items in your shopping cart.

0

1963-72 Chevy Pickup Rear Dropmember, Coilovers

$2,099.00

Quick Overview

The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

Level 1, Mild

Ride height measures approx. 8” when running a 30” tall tire (measurements are taken from bottom of the frame rail under the cab to the ground).

Level 2, Touring

Ride height measures approx. 6” when running a 30” tall tire (measurements are taken from bottom of the frame rail under the cab to the ground).


All rear kits are compatible with both long and short bed trucks.


Inboard Coilovers can use up to 15" Wide Wheels

Outboard Coilovers can use up to 12" Wide Wheels



* Required Fields

$2,099.00

Details

Basic Kit Includes:

  • - Trailing arm/Trailing arm x-member assembly OR Adjustable 4-Link assembly*
  • - Modular bolt-in notch assembly
  • - Bolt-in bridge assembly
  • - Lower coilover mounting brackets
  • - Maximum length fully adjustable trac-bar
  • * C20 Kit is ONLY available in a four-link configuration.

All rear kits are compatible with both long and short bed trucks.


Inboard Coilovers can use up to 15" Wide Wheels
Outboard Coilovers can use up to 12" Wide Wheels

Does not come powdercoated.


Dropmember Level 1 Rear Coil-over

The Dropmember Level 1 Rear is a modular suspension system designed to replace the factory components and improve ride quality, performance, aesthetics, and strength. It is available in either a trailing arm or four-bar variation and comes with a bolt-in step notch. Ride height measures approx. 8” when running a 30” tall tire (measurements are taken from bottom of the frame rail under the cab to the ground).

DOES NOT require modification of the stock bed floor.

C20 Kit is ONLY available in a four-link configuration.

Designed to be paired with our Dropmember Level 1 Front.


Level 1

Level 2

Dropmember Level 2 Rear Coil-over

The Dropmember Level 2 Rear is a modular suspension system designed to replace the factory components and improve ride quality, performance, aesthetics, and strength. It is available in either a trailing arm or four-bar variation and comes with a bolt-in step notch. Ride height measures approx. 6” when running a 30” tall tire (measurements are taken from bottom of the frame rail under the cab to the ground).

DOES require modification of the stock bed floor.

C20 Kit is ONLY available in a four-link configuration.

Designed to be paired with our Dropmember Level 2 Front.



Level 1

Level 2

Options & Upgrades

Porterbuilt Rear Frame Crossmember

Porterbuilt rear frame crossmembers are built using polished 1.5" OD heavy wall tubing and CNC cut, precision formed, and machine polished 3/16 plate. Includes the necessary grade 8 hardware for installation.

Ridetech Coilovers

Ridetech Handling Quality (“HQ”) Coilover Series - The HQ coil-over allows the driver to tune and adjust the shock performance and/or ride quality at the turn of a knob located on the shock body. The HQ series is a rebound single adjustable shock.

Ridetech Track Quality (“TQ”) Coilover Series - The TQ coilover has a single rebound adjustment and a DUAL stage [high speed and low speed] compression adjustment. It uses a remote reservoir that is connected with a 30" braided line for easy installation in a variety of installation applications.

Brakes

CPP Rear Disc Brake Wheel Kits - Available in 5 or 6 lug, includes rotors, loaded calipers, caliper brackets, rear hardline kit, rubber brake hose kit and all mounting hardware.

CPP Rear Big Brake Wheel Kits - Available in 5 or 6 lug, includes 12” cross-drilled, gas slotted and zinc washed rotors, CPP calipers, brake lines, brackets, cables, hoses, clips, instructions and necessary hardware to assure a hassle-free installation. This kit requires larger diameter disc brake type 16” wheels.

Wilwood Forged Dynalite Rear Parking Brake Pro-Series rear disc kits feature forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines.

Wilwood D154 Pro-Series rear disc kits feature forged D154 dual piston calipers, 12.19” one-piece drum/rotors, and high friction pads to provide optimized and balanced braking for all types of custom performance street/strip and show machines.

Wilwood Forged Dynapro Low-Profile Pro-Series rear disc brake kits provide extra clearance for 14.00” to 15.00” rim applications. Forged billet Dynapro Low-Profile four-piston calipers 11.00” one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines.

Wilwood Forged Narrow Superlite 4R rear disc kits feature four piston calipers, 13” two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines.

Wilwood AERO4 Rear Parking Brake kits provide the ultimate Big Brake solution for popular muscle car rear axles that require a parking brake. Forged AERO4 four piston calipers, 14” two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines.

Wilwood kits are not compatible with C20 or C30 models.

Additional Information

Typical Production Time: 10-12 Weeks

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.