0
You have no items in your shopping cart.

0

Chevy / GMC Blazers

31 Item(s)

List  Grid 

  1. 1963-72 Bolt-In Level 3 Step Notch

    1963-72 Bolt-In Level 3 Step Notch
    Learn More
    $599.00
  2. 1963-72 Chevy Pickup Front Dropmember - Airbag

    The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.
    ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME. Level 1 When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.
    Level 3 When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
    Learn More
    Starting at $1,499.00
  3. 1963-72 Fully Adjustable Trac-Bar Kit

    If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!

    Learn More
    Starting at $199.00
  4. 1963-72 Stage 1 Rear Kit

    The stage 1 rear kit is both an economical and easy way to lower the rear of your 63-72 C10′s trailing arm suspension. The air spring and mounting plates replace the factory steel coil spring, allowing a better ride quality and adjustability! Our Stage 1 shock relocator brackets improve shock function by decreasing the shock angle!

    Learn More
    $549.00

    Out of stock

  5. 1963-72 Stage 2 Deluxe Rear Kit - Airbag

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    Starting at $2,099.00
  6. 1963-72 Stage 2 Deluxe Rear Kit - Coilovers

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    Starting at $2,099.00
  7. 1963-72 Stage 2 Rear C-Notch

    1963-72 Stage 2 Rear C-Notch
    Learn More
    $299.00
  8. 1963-87 Stage 1 Front Kit

    Looking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace the factory steel coil spring with an air spring while maintaining the factory control arms.

    Learn More
    $549.00

    Out of stock

  9. 1963-87 Stage 2 Basic Front Kit

    The Porterbuilt Stage 2 Basic Front Kit for '63-'87 Chevy Trucks improves ride quality and overall driveability by replacing the factory lower control arms and and factory coil spring with an air spring.

    Learn More
    $1,249.25
  10. 1963-87 Stage 2 Deluxe Front Kit

    If you are looking for the best possible kit to convert your truck to air suspension but maintain your factory front crossmember, this is the kit for you. The Porterbuilt Stage 2 Deluxe Front Kit for '63-'87 Chevy Trucks replaces your factory control arms and coil springs, lowering your truck and improving handling, without replacing the factory front crossmember.

    Learn More
    $1,629.25
  11. 1967-72 Chevy Truck Cowl Mounted Hood Hinges, Gas Assisted

    The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed. They are available for model years 1960-1972.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
    Learn More
    $399.00
  12. 1973-87 Chevy Pickup Front Dropmember - Airbag

    The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.
    ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME. Level 1 When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.
    Level 3 When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
    Learn More
    Starting at $1,499.00
  13. 1973-87 Chevy Pickup Front Dropmember, Coilovers

    The Dropmember Front Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.

    ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS AND RACK & PINION HARDWARE. ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 2 TOURING.
    When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 7-8” off the ground at ride height. When combined with a 2.5” drop spindle and 28” tall tire, the Level 2 Front will set the lowest point of the factory frame rails approx. 6-7 inches off the ground at ride height.
    Learn More
    Starting at $1,499.00
  14. 63-72 Carrier Bearing Crossmember

    63-72 Carrier Bearing Crossmember
    Learn More
    $199.00
  15. 63-72 Panhard Bar Crossmember

    Panhard Bar Crossmember
    Learn More
    $89.00
  16. 63-72 Rear Frame Crossmember

    Rear Frame Crossmember 63-72
    Learn More
    $99.00
  17. 63-72 Trailing Arm Crossmember, 1 Piece Driveshaft

    63-72 Trailing Arm Crossmember, 1 Piece Driveshaft
    Learn More
    $249.00
  18. 63-72 Trailing Arm Crossmember, 2 Piece Driveshaft

    63-72 Trailing Arm Crossmember, 2 Piece Driveshaft
    Learn More
    $249.00
  19. 63-72 Trailing Arm Crossmember, Boxed

    The Porterbuilt Fully Adjustable Trailing Arm Crossmember is designed to eliminate multiple rear suspension concerns that are presented when lowering the rear of a 1963-1972 truck. It is a direct bolt-in, utilizing the factory mounting locations. It also allows for multiple fore-aft mounting points, along with multiple mounting points for the front trailing arm mounts. The advantage of the multiple fore-aft mounting points is to allow the wheels to be centered in the rear wheel well opening with various drops. The multiple front trailing arm mounting locations allow allowing for adjustments to the instant center, resulting in better performance. It is available for two piece driveshaft configurations and will allow for a 3″ exhaust to pass between the tubing.

    Learn More
    $349.00
  20. 63-72 Trailing Arm Crossmember, No Tabs

    63-72 Trailing Arm Crossmember, No Tabs
    Learn More
    $199.00
  21. 63-87 Transmission Crossmember

    63-87 Transmission Crossmember
    Learn More
    $89.00
  22. 67-72 Core Support Crossmember

    This tubular crossmember replaces the front factory crossmember located directly below the core support. It bolt in place through the rivet holes that locate the front core support mounting brackets. Grade 8 mounting hardware included.

    Learn More
    $79.00
  23. 67-72 Firewall Filler Panels

    67-72 Firewall Filler Panels
    Learn More
    $249.00
  24. 67-72 Hood Hinge Gas Assist Upgrade

    67-72 Hood Hinge Gas Assist Upgrade

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
    Learn More
    $189.00
  25. 69-72 Blazer/Suburban Rear Dropmember, Airbag

    The Dropmember Rear modular suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.
    Level 1, Mild
    Ride height measures approx. 8” when running a 30” tall tire, and deflated height is approximately 3”.
    Level 2, Touring
    Ride height measures approximately 6” when running a 30” tall tire, and deflated height is approximately 1”.
    Level 3, Extreme
    Ride height measures approx. 5” when running a 30” tall tire, and the frame will rest on the ground when deflated.

    All rear kits are compatible with both long and short bed trucks.


    Learn More
    Starting at $2,099.00
  26. 73-87 Firewall Filler Panels

    73-87 Firewall Filler Panels
    Learn More
    $99.00
  27. Boyd Aluminum Fuel Tank, Bed Fill, EFI Aeromotive A-1000 Pump - 63-72 C10

    Product Number: 14017
    Approx 19 Gallons

    1963-72 Chevy C10
    Bed Fill
    Aeromotive A-1000 In-Tank Pump
    Supports 1200+ HP

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    Starting at $898.00
  28. Boyd Aluminum Fuel Tank, Bed Fill, EFI Aeromotive Stealth Pump - 63-72 C10

    Product Number: 14004
    Approx 19 Gallons

    1963-72 Chevy C10
    Bed Fill
    Aeromotive In-Tank Pump

    Learn More
    Starting at $648.00
  29. Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI - 63-72 C10

    Product Number: 14001
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Bed Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    Starting at $349.00
  30. Boyd Aluminum Fuel Tank, Side Fill, EFI Aeromotive Stealth 340 Pump - 63-72 C10

    Product Number: 14003
    Approx 19 Gallons

    1963-72 Chevy C10
    Side Fill
    Aeromotive In-Tank Pump

    Learn More
    Starting at $648.00
  31. Boyd Aluminum Fuel Tank, Side Fill, Non-EFI - 63-72 C10

    Product Number: 14002
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Side Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    Starting at $349.00

31 Item(s)

List  Grid