SKU:
DM7-5559-3-A

1955-59 Chevy Pickup Front Dropmember, Airbag

$1,799.00

The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

Ride Height - 4"
Deflated Height - Lay Frame

1955-59 Dropmember Level 3 Front Airbag

The Version 7, Level 3 Front Dropmember system for 1955-59 Chevy Pickups is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.

Advantages include:

  • - Revised suspension geometry for improved performance and ride quality
  • - Rack and pinion steering for increased steering response
  • - Proper wheel center-line placement (sets the wheel center-line in the middle of the wheel well opening for a more balanced look)

When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

Designed to be paired with our Dropmember Level 3 Rear.


Basic Kit Includes:

  • - Frame Rail Assembly
  • - Main crossmember assembly (Dropmember)
  • - Inner truss support system
  • - Core support crossmember
  • - Shock relocate brackets
  • - Grade 8 hardware for installation

Does NOT come powdercoated. All parts come raw.


Options & Upgrades

Porterbuilt Motor Mounts (required)

Porterbuilt motor mounts bolt directly to the block and include all hardware necessary for installation. Available in a variety of configurations:
Small Block Chevy, SBC
Big Block Chevy, BBC
LS GEN3
LT

Porterbuilt Tubular Control Arms (required)

Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

Rack & Pinion

Unisteer Rack & Pinion kits have everything you need to switch over to a standard ratio rack & pinion. Available in power or manual. Don't forget to add hoses and steering linkage.

CPP Rack & Pinon kits are a budget friendly solution without sacrificing quality.

Rack & Pinion Hardware (required)

The rack and pinion hardware kit connects the steering rack to the Dropmember and tie rod ends to the spindles. Includes billet rack mount bushings, high-quality rod ends, mis-alignment spacers, and custom machined tie rod adjuster sleeves.

Shock Kits

KYB Excel-G gas shocks and struts rely on velocity-sensitive valving to respond to changing road conditions for a smooth, comfortable ride. They feature sintered-iron pistons and guide rods for strength, hard-chrome piston rods for added durability, and seamless cylinders and eyerings that eliminate the typical weak points. Excel-G shocks and struts also have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.

Ridetech HQ Series Shocks - The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!

Airbags

Air Lift Dominator D2600 airbag kit includes 2 airbags plus hardware (fittings are not included). The Dominator D2600 features an unprecedented maximum restrained pressure of 600 psi, 9.7″ usable stroke, and a load range of 349-3055 lbs. This bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry, you can’t go wrong with the Dominator D2600!

Sway Bar

This 1.25″ OD sway bar is manufactured by Porterbuilt, and is available for factory crossmember and Dropmember equipped trucks. It includes all mounting hardware necessary.

Spindles & Brakes

CPP 2" Modular Drop Spindles - One-piece nodular iron design with pressed in alloy steel axle pin; installs with no modifications; allows early years to update to larger bearing. Lowers your truck 2" without moving the wheels out.

CPP Modular™ Drop Spindle Wheel Kits - Available in 5 or 6 lug, comes with 2" drop spindles, 12" rotors, and Wilwood D52 calipers.

Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit (Hub) - Billet forged six-piston calipers with 14” rotors deliver the ultimate combination for braking power and style. These kits require the use of 18” and larger wheels. Only available for 5 lug applications.

Porterbuilt Transmission Crossmember

Porterbuilt transmission crossmembers are built using thick-wall 1.5" OD tubing and CNC cut 3/16 pickeled plate steel. Includes the necessary grade 8 hardware for installation.
An Energy Suspension transmission mounts is necessary. We recommend one of the two below for GM transmissions:
Energy Suspension 3.1108G GM Transmission Mount
Energy Suspension 3.1158G GM Transmission Mount - Short


Tech Information:

We recommend a 2-piece driveshaft for all Level 3 Dropmember kits.

All Dropmember kits require the use of a 30" steering column.

LS Engine swaps require the use of a "muscle car" pan such as the Holley 302-2 or GM pan.
Holley 302-2 Oil Pan

More Information
Manufacturer
PB Fab
Make
Chevy / GMC
Year
1955-59
Model
C10
Build time
Typical Production Time is 4-5 weeks
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account




Lead Time & Shipping Info

All Porterbuilt products are hand built by our staff of professional fabricators in our Arizona facility, using state-of-the-art welding and precision fabrication equipment. Our products are built with quality and performance in mind.

For additional information on our manufacturing and lead times, please click here: Production & Shipping Info.





CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
To Top