The 1973-87 Chevy C30 Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
When combined with our C30 specific 3” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
The Version 7, Level 3 Front Dropmember system for 1973-87 Chevy C30 is designed to replace the factory cross-member and steering system. Engineered as a modular bolt-in unit, its advantages include:
When combined with a our C30 3" drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory factory frame rails on the ground when fully deflated.
When running the Level 3 Front, the engine placement is moved forward and up from its factory location.
Does NOT come powdercoated. All parts come raw.
Porterbuilt motor mounts bolt directly to the block and include all hardware necessary for installation. Available in a variety of configurations:
Small Block Chevy, SBC
Big Block Chevy, BBC
LS GEN3
LT
Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16 pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.
The C30 Dropmember requires the use of Porterbuilt C30 arms and C30 specific spindle.
Use 1" Narrowed arms for 8-lug wheels.
Use Standard Length arms for 10-lug wheels.
NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .
Unisteer Rack & Pinion kits have everything you need to switch over to a standard ratio rack & pinion. Available in power or manual. Don't forget to add hoses and steering linkage.
CPP Rack & Pinon kits are a budget friendly solution without sacrificing quality.
The rack and pinion hardware kit connects the steering rack to the Dropmember and tie rod ends to the spindles. Includes billet rack mount bushings, high-quality rod ends, mis-alignment spacers, and custom machined tie rod adjuster sleeves.
KYB Excel-G gas shocks and struts rely on velocity-sensitive valving to respond to changing road conditions for a smooth, comfortable ride. They feature sintered-iron pistons and guide rods for strength, hard-chrome piston rods for added durability, and seamless cylinders and eyerings that eliminate the typical weak points. Excel-G shocks and struts also have a patented check valve to minimize foaming and aeration and maintain control under tough conditions.
Ridetech HQ Series Shocks - The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Air Lift Dominator D2600 airbag kit includes 2 airbags plus hardware (fittings are not included). The Dominator D2600 features an unprecedented maximum restrained pressure of 600 psi, 9.7″ usable stroke, and a load range of 349-3055 lbs. This bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry, you can’t go wrong with the Dominator D2600!
This 1.25″ OD sway bar is manufactured by Porterbuilt, and is available for factory crossmember and Dropmember equipped trucks. It includes all mounting hardware necessary.
C30 specific 3" drop spindle required.
Porterbuilt 1993-99 C2500/C3500 Brake Kit for 8-lug applications includes 12.5" rotors and a single piston caliper. Includes bearings and brake pads.
Porterbuilt transmission crossmembers are built using thick-wall 1.5" OD tubing and CNC cut 3/16 pickeled plate steel. Includes the necessary grade 8 hardware for installation.
An Energy Suspension transmission mounts is necessary. We recommend one of the two below for GM transmissions:
Energy Suspension 3.1108G GM Transmission Mount
Energy Suspension 3.1158G GM Transmission Mount - Short
We recommend a 2-piece driveshaft for all Level 3 Dropmember kits.
All Dropmember kits require the use of a 30" steering column.
LS Engine swaps require the use of a "muscle car" pan such as the Holley 302-2 or GM pan.
Holley 302-2 Oil Pan
Manufacturer | PB Fab |
---|---|
Make | Chevy / GMC |
Year | 1973-87 |
Model | C30 |
Build time | Typical Production Time is 4-5 weeks |
Instructions | Please email tech@pbfab.com for installation instructions. |
CA PROP 65 WARNING | CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |