Wilwood Aluminum Master Cylinder w/Pushrod, 7/8" Bore

$230.95
Wilwood’s 7/8" bore Tandem Aluminum Master Cylinder available in 3 finishes, plain, ball burnished, and black e-coat.
SKU
260-9439

Wilwood’s 7/8" bore Tandem Aluminum Master Cylinder available in 3 finishes, plain, ball burnished, and black e-coat. These master cylinders are designed primarily for manual applications and include a pushrod. They’re designed for mount flanges from 3.22” to 3.40”, common measurements for most domestic cars and trucks from the mid 1960s to present, and offer fluid outlet ports on both sides of the bore. The stroke is set at 1.10” with a volume ratio of 2:1 between the primary and secondary chambers. Machined from high-pressure die castings, each master cylinder weighs only 3lbs, a 75% weight savings over most cast iron OE type master cylinders. Wilwood also offers a combination proportioning valve kit, which includes brackets and stainless lines specifically for use with this master cylinder, see PN 260-13190, or 220-13189 for retrofit kit.

Overall Length - 12.26"
Flange to End Length - 8.15"
Outlet Size - 1/2-20

More Information
Manufacturer Wilwood
Build time Shipped Directly From Manufacturer
Instructions Please email tech@pbfab.com for installation instructions.
CA PROP 65 WARNING CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov




CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov