Search results for: 'Stage 1 airbags'

Filter
Set Ascending Direction

99 Items

per page
View as List Grid
Did you mean
stage 1 airbag
Related search terms
Stage 3 rear kit
stage 2 deluxe rear kit
stage 2 c63 72 state 2 c notch notch
Stage 2 Deluxe Front Kit.
Stage 2 Deluxe Front Kit
  1. 1963-72 Stage 1 Rear Kit

    The stage 1 rear kit is both an economical and easy way to lower the rear of your 63-72 C10′s trailing arm suspension. The air spring and mounting plates replace the factory steel coil spring, allowing a better ride quality and adjustability! Our Stage 1 shock relocator brackets improve shock function by decreasing the shock angle!

    Learn More
    $699.00
  2. 1963-87 Stage 1 Front Kit

    Looking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace the factory steel coil spring with an air spring while maintaining the factory control arms.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $699.00
  3. 1963-72 Stage 2 Deluxe Rear Kit - Airbag

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    $2,399.00
  4. 1963-72 Chevy Pickup Rear Dropmember , Level 1 Airbag

    The 1963-72 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

    Learn More
    $2,399.00
  5. 1973-87 Chevy Pickup Rear Dropmember , Level 1 Airbag

    The 1973-87 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

    Learn More
    $2,399.00
  6. 1973-87 Chevy Pickup Front Dropmember, Level 1 Airbag

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  7. 1963-72 Chevy Pickup Front Dropmember, Level 1 Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  8. 1963-87 Stage 2 Basic Front Kit

    The Porterbuilt Stage 2 Basic Front Kit for '63-'87 Chevy Trucks improves ride quality and overall driveability by replacing the factory lower control arms and and factory coil spring with an air spring.

    Learn More
    $1,549.00
  9. 1963-87 Stage 2 Deluxe Front Kit

    If you are looking for the best possible kit to convert your truck to air suspension but maintain your factory front crossmember, this is the kit for you. The Porterbuilt Stage 2 Deluxe Front Kit for '63-'87 Chevy Trucks replaces your factory control arms and coil springs, lowering your truck and improving handling, without replacing the factory front crossmember.

    Learn More
    $2,049.00
  10. 1955-59 Chevy Pickup Rear Dropmember, Airbag

    The 1955-59 Chevy Pickup Rear Airbag Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

    Learn More
    $2,399.00
  11. Shock Kit (Sold in pairs)

    Replacement Shock Kit

    Applications:
    Dropmember Level 1, Dropmember Level 2, Dropmember Level 3
    Stage 1 Front, Stage 2 Front
    Stage 1 Rear, Stage 2 Rear Basic, Stage 2 Rear Deluxe

    Learn More
    $165.00
  12. 1973-87 Chevy Pickup Rear Dropmember , Level 3 Airbag

    The 1973-87 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  13. 1963-72 Chevy Pickup Rear Dropmember , Level 3 Airbag

    The 1963-72 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  14. 1969-72 Chevy Blazer 2WD Rear Dropmember , Level 3 Airbag

    The 1963-72 Chevy Blazer 2WD Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  15. 1969-72 Chevy Blazer 4WD Rear Dropmember , Level 3 Airbag

    The 1963-72 Chevy Blazer 4WD Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  16. 1947-54 Chevy Pickup Rear Dropmember, Airbag

    The 1947-54 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body

    Learn More
    $2,999.00
  17. 1960-62 Chevy Pickup Rear Dropmember, Airbag

    The 1960-62 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

    Learn More
    $2,399.00
  18. 1973-87 Chevy Pickup Rear Dropmember, Level 1 Coilovers

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

    Learn More
    $2,399.00
  19. 1963-72 Chevy Pickup Rear Dropmember, Level 1 Coilovers

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

    Learn More
    $2,399.00
  20. 1963-72 Chevy Pickup Front Dropmember, Level 1 Coilover

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

    Learn More
    $1,399.00
  21. 1973-87 Chevy Pickup Front Dropmember, Level 1 Coilover

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

    Learn More
    $1,399.00
  22. 1963-72 Chevy Pickup Rear Back Half Kit, Level 3 Airbag

    The Dropmember Rear Back Half suspension system is engineered to lay frame with 12-15" wide wheels.
    Fits 1963-72 C10 Trucks
    Level 3, Extreme

    Ride height measures approx. 5” and the frame will rest on the ground when deflated.

    DESIGNED FOR 12"-15" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  23. 1960-62 Chevy Pickup Rear Back Half Kit, Level 3 Airbag

    The Dropmember Rear Back Half suspension system is engineered to lay frame with 12" wide wheels.
    Fits 1960-62 C10 Trucks
    Level 3, Extreme

    Ride height measures approx. 5” when running a 30” tall tire, and the frame will rest on the ground when deflated.

    DESIGNED FOR 12" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  24. 1963-72 Boxed Inner Frame Stiffener, 1 Piece Driveshaft

    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks

    Fits: 1963-72 Chevy Trucks
    Learn More
    $1,499.00
  25. 1955-59 Chevy Pickup Front Dropmember, Airbag

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,799.00
  26. 1947-54 Chevy Pickup Front Dropmember, Airbag

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,799.00
  27. 1960-62 Chevy Pickup Front Dropmember, Airbag

    The 1960-62 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  28. 1963-72 Chevy Pickup Front Dropmember, Level 3 Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  29. 1973-87 Chevy Pickup Front Dropmember, Level 3 Airbag

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  30. Porterbuilt Tubular Control Arms Dropmember Version 7, 1'' Narrowed

    THESE CONTROL ARMS ARE FOR VERSION 7 DROPMEMBER APPLICATIONS ONLY.

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  31. Porterbuilt Tubular Control Arms Dropmember Version 5, 1'' Narrowed

    THESE CONTROL ARMS ARE FOR EARLY (PRE VERSION 7) DROPMEMBER APPLICATIONS ONLY.

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  32. 1963-72 Trailing Arm Crossmember, 1 Piece Driveshaft

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
    Learn More
    $329.00
  33. 1963-72 Boxed Trailing Arm Crossmember, 1 Piece Driveshaft

    Boxed trailing arm crossmember built using 3/16" steel.

    Fits: 1963-72 Chevy Trucks
    Learn More
    $399.00
  34. 1973-87 Boxed Inner Frame Stiffener, 1 Piece Driveshaft - Driver Side Cat, 5.5" Exhaust
    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks
    Driver Side Catalytic Converter Specific
    FEATURES LARGE 5.5" EXHAUST CUTOUTS Learn More
    $1,499.00
  35. Porterbuilt 1963-87 Tubular Control Arms - Factory Crossmember

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Available in the following configurations:
    1" Forward
    1" Narrowed
    1" Forward & 1" Narrowed
    Standard Length

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  36. 1961-64 Ford F100 Front Dropmember

    The Dropmember Level 3 61-64 Ford F100 Front suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.


    Learn More
    $1,999.00
  37. Porterbuilt Tubular Control Arms Coilover Dropmember Version 7, 1'' Narrowed

    THESE CONTROL ARMS ARE FOR VERSION 7, COILOVER DROPMEMBER APPLICATIONS ONLY.

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  38. 1963-72 Chevy Pickup Rear Back Half Kit, Level 2 Coilover

    The Dropmember Rear Back Half suspension system is engineered fit 12-15" wide wheels.
    Fits 1963-72 C10 Trucks
    Level 2, Touring

    Ride height measures approx. 5” when running a 30” tall tire.

    DESIGNED FOR 12"-15" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  39. 1960-62 Chevy Pickup Rear Back Half Kit, Level 2 Coilover

    The Dropmember Rear Back Half suspension system is engineered fit 12" wide wheels.
    Fits 1960-62 C10 Trucks
    Level 2, Touring

    Ride height measures approx. 5” when running a 30” tall tire.

    DESIGNED FOR 12" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  40. FLO Airride Billet Tank, 28"
    FLO Airride Billet Tank, 28"
    Dimensions: 28" Long x 6" Deep x 6-3/4" Tall
    End Ports: Two 1/4", Two 3/8", One 1/8"
    Drain Port: One 1/8" Learn More
    $335.00
  41. Porterbuilt Air Management Brackets - 1963-72 C10
    Fits 1963-72 C10′s and mounts (1) 2.5 or 3 gallon tank & (1) VIAIR 400C, 444C or 480C compressor. Will NOT work with AccuAir 3 gallon tanks. Sold individually (driver or passenger) or as pairs. Learn More
    $99.95
  42. CPP 1963-87 C10 Front Coil Springs (pair)
    These high quality coil springs from CPP come black powdercoated.
    Available in stock height, 1" drop, 2" drop, or 3" drop. Learn More
    $129.00
  43. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors - 140-15940

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    15" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $1,283.30
  44. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors, 6 Lug - 140-15944

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    6 Lug
    12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    15" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $1,321.61
  45. Boyd Aluminum Fuel Tank, Bed Fill, EFI Aeromotive Stealth Pump - 1963-72 C10

    Product Number: 14004
    Approx 19 Gallons

    1963-72 Chevy C10
    Bed Fill
    Aeromotive In-Tank Pump

    Learn More
    $720.00
  46. Firestone F9000 Air Spring Kit (Includes 2 air springs)

    This standard Firestone air spring offers maximum load support and operates at up to 100 psi. The spring has a 1/4" inflation port, a ride height of 8.25" and a maximum diameter of 5.70".

    * Includes 2 air springs

    Learn More
    $200.00
  47. 1955-59 Chevy Pickup Rear Dropmember, Coilovers

    The 1955-59 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

    Learn More
    $2,399.00
  48. 1947-54 Chevy Pickup Rear Dropmember, Coilovers

    The 1947-54 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

    Learn More
    $2,999.00
  49. 1973-87 Chevy Pickup Rear Dropmember, Level 2 Coilovers

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

    Learn More
    $2,399.00
  50. 1963-72 Chevy Pickup Rear Dropmember, Level 2 Coilovers

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

    Learn More
    $2,399.00
  51. 1960-62 Chevy Pickup Rear Dropmember, Coilovers

    The Porterbuilt 1960-62 Rear coilover suspension system is a modular suspension system designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride height measures approx. 6” when running a 30” tall tire (measurements are taken from bottom of the cab to the ground).
    DOES require modification of the stock bed floor.
    All rear kits are compatible with both long and short bed trucks.
    Designed with inboard coilovers that can accommodate up to 10" Wide Wheels
    Learn More
    $2,399.00
  52. LS Headers

    These stainless steel headers are used with the Porterbuilt Level 3 Dropmember (Version 5, 6 & 7) when doing an LS swap.

    Learn More
    $349.00
  53. Low Profile LT Swap Oil Pan Kit
    Low Profile LT Oil Pan Kit
    LT GEN V, A BODY, G BODY
    Fits LT1, LT4, L83, L86, 5.3L, 6.2L
    Dropmember Compatible Learn More
    $379.00
  54. Accuair Starter Air Suspension Package
    The Accuair Starter Package is going to include an ENDO-T air tank and an e+ Connect which includes an ECU+, wireless switch box, and e-Level+ app. This is the perfect introductory kit for anyone looking to get a high-quality air management system without breaking the bank. Learn More
    $2,399.95
  55. Wilwood Aluminum Master Cylinder w/Pushrod, 7/8" Bore
    Wilwood’s 7/8" bore Tandem Aluminum Master Cylinder available in 3 finishes, plain, ball burnished, and black e-coat. Learn More
    $230.95
  56. CPP Modular Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5
    CPP Modular Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted Available
    2 Piston Calipers
    18" Minimum Wheel Diameter Learn More
    $799.00
  57. CPP Modular Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5
    CPP Modular Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted Available
    2 Piston Calipers, Wilwood Upgrade Available
    18" Minimum Wheel Diameter Learn More
    $799.00
  58. CPP Modular Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5
    CPP Modular Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted Available
    2 Piston Calipers, Wilwood Upgrade Available
    18" Minimum Wheel Diameter Learn More
    $799.00
  59. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5WWB
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Black Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  60. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5WWR
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Red Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  61. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5WWR
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Red Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  62. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5WWB
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Black Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  63. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5WWB
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Black Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  64. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5WWR
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Red Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  65. 1963-72 Trailing Arm Crossmember, No Tabs

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
    Learn More
    $329.00
  66. Ridetech HQ Shock Kit (pair)
    The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads! Designed to replace OEM Shock Absorbers. Learn More
    $510.00
  67. Air Lift Dominator 2600 Air Bag Kit (Includes 2 air bags)

    Air Lift Performance is proud to announce the second model from the brand new Dominator series line of air springs: the Dominator D2600!

    *Includes 2 air bags

    Learn More
    $234.00
  68. Brake Booster Kit - 1967-72 C10
    7" Dual Diaphragm Brake Booster with Wilwood Aluminum Tandem Master Cylinder Kit
    Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
    Includes proportioning valve and bracket Learn More
    $554.28
  69. Brake Booster Kit - 1960-66 C10
    7" Dual Diaphragm Brake Booster with Wilwood Aluminum Tandem Master Cylinder Kit
    Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
    Includes proportioning valve and bracket Learn More
    $549.28
  70. 1947-54 Chevy Pickup Front Dropmember, Coilovers

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,799.00
  71. 1955-59 Chevy Pickup Front Dropmember, Coilovers

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,799.00
  72. Accuair Premium Air Suspension Package
    The Accuair Premium Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, and height sensors. This is the perfect mid-level kit for anyone looking to get a high-quality air management system and programmable ride heights at an affordable price. Learn More
    $2,999.99
  73. 1963-72 Chevy Pickup Front Dropmember, Level 2 Coilover

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

    Learn More
    $1,399.00
  74. 1973-87 Chevy Pickup Front Dropmember, Level 2 Coilover

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

    Learn More
    $1,399.00
  75. Accuair Ultimate Air Suspension Package
    AccuAir’s Ultimate Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, ride height sensors, and a TouchPad+. This is the perfect top-of-the-line kit for anyone looking to get the best components for their air suspension management. Learn More
    $3,499.99
  76. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors, 6 Lug - 140-15946

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    6 Lug
    14" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    18" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $2,295.68
  77. Boyd Aluminum Fuel Tank, Bed Fill, EFI Aeromotive Stealth 340 Pump - 1973-87 C10

    Product Number: 14040
    Approx 19 Gallons

    1973-87 Chevy C10
    Bed Fill
    Aeromotive In-Tank Pump

    Learn More
    $720.00
  78. Boyd Aluminum Fuel Tank, Side Fill, EFI Aeromotive Stealth 340 Pump - 1973-87 C10

    Product Number: 14040
    Approx 19 Gallons

    1973-87 Chevy C10
    Side Fill
    Aeromotive In-Tank Pump

    Learn More
    $720.00
  79. 1960-62 Chevy Pickup Front Dropmember, Coilovers

    The 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,399.00
  80. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors, 6 Lug - 140-15945

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    6 Lug
    13" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    17" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $2,023.74
  81. Boyd Aluminum Fuel Tank, Side Fill, Non-EFI - 1973-87 C10

    Product Number: 14039
    Approx 19 Gallons

    1973-87 Chevy C10
    Standard
    Side Fill
    Non-EFI

    * Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.

    Learn More
    $388.00
  82. Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI - 1973-87 C10

    Product Number: 14038
    Approx 19 Gallons

    1973-87 Chevy C10
    Standard
    Bed Fill
    Non-EFI

    * Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.

    Learn More
    $388.00
  83. Boyd Aluminum Fuel Tank, Side Fill, EFI Aeromotive Stealth 340 Pump - 1963-72 C10

    Product Number: 14003
    Approx 19 Gallons

    1963-72 Chevy C10
    Side Fill
    Aeromotive In-Tank Pump

    Learn More
    $720.00
  84. Boyd Aluminum Fuel Tank, Side Fill, Non-EFI - 1963-72 C10

    Product Number: 14002
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Side Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    $388.00
  85. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15942

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    14" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    18" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $2,252.36
  86. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15941

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    13" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    17" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $1,955.49
  87. Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI - 1963-72 C10

    Product Number: 14001
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Bed Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    $388.00
  88. 1963-72 Stage 2 Deluxe Rear Kit - Coilovers

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    $2,199.00
  89. 1961-64 Ford F100 Rear Dropmember
    The Porterbuilt Level 3 61-64 Ford F100 Rear suspension system is a modular suspension system engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)
    Learn More
    $2,399.00
  90. PB Full Chassis

    Our PB Fab custom built full frames are available for a variety of trucks. Each frame is custom built, hand welded and hand metal finished specifically for you.

    Learn More
    $15,000.00
  91. Hooker Headers #2466HKR - SBC Headers

    Compatible with Level 1-3 Dropmember equipped trucks running a SBC engine.

    NOT COMPATIBLE WITH THE VERSION 7 DROPMEMBER.

    We DO NOT stock these headers. They can be purchased here:
    http://www.summitracing.com/parts/hok-2466hkr.

    Learn More
    $179.95
  92. Low Profile LSX Swap Oil Pan Kit, F-Body
    Low Profile Oil Pan Kit
    LSX Engine, F-Body Oil Pan
    Fits 4.8L, 5.3L, 6.0L, 6.2L
    Dropmember Compatible Learn More
    $349.00
Filter
Set Ascending Direction

99 Items

per page
View as List Grid