Search results for: 'installation instructions'

Filter
Set Ascending Direction

101 items

Page
per page
View as List Grid
Related search terms
installation+instructions+for+hood+hinges
installation instructions for 67-72 gas assist hood hinges
installation instructions ford the extreme drop
Installation frame shorting
installation instructions for hood hinges 67-72 c10
  1. 1963-72 Fully Adjustable Trac-Bar Kit

    If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!

    Learn More
    $299.00
  2. Boyd Aluminum Fuel Tank, Side Fill, Non-EFI - 1963-72 C10

    Product Number: 14002
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Side Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    $388.00
  3. Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI - 1963-72 C10

    Product Number: 14001
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Bed Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

    Learn More
    $388.00
  4. Porterbuilt Tubular Control Arms Coilover Dropmember Version 7, 1'' Narrowed

    THESE CONTROL ARMS ARE FOR VERSION 7, COILOVER DROPMEMBER APPLICATIONS ONLY.

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  5. Porterbuilt Tubular Control Arms Dropmember Version 7, 1'' Narrowed

    THESE CONTROL ARMS ARE FOR VERSION 7 DROPMEMBER APPLICATIONS ONLY.

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  6. Porterbuilt Tubular Control Arms Dropmember Version 5, 1'' Narrowed

    THESE CONTROL ARMS ARE FOR EARLY (PRE VERSION 7) DROPMEMBER APPLICATIONS ONLY.

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  7. Porterbuilt 1963-87 Tubular Control Arms - Factory Crossmember

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Available in the following configurations:
    1" Forward
    1" Narrowed
    1" Forward & 1" Narrowed
    Standard Length

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

    Learn More
    $1,099.00
  8. Boyd Aluminum Fuel Tank, Side Fill, Non-EFI - 1973-87 C10

    Product Number: 14039
    Approx 19 Gallons

    1973-87 Chevy C10
    Standard
    Side Fill
    Non-EFI

    * Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.

    Learn More
    $388.00
  9. Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI - 1973-87 C10

    Product Number: 14038
    Approx 19 Gallons

    1973-87 Chevy C10
    Standard
    Bed Fill
    Non-EFI

    * Pictures may show optional accessories installed. Depending upon the options you choose your tank may vary slightly from shown.

    Learn More
    $388.00
  10. 1955-59 Chevy Pickup Rear Dropmember, Coilovers

    The 1955-59 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

    Learn More
    $2,399.00
  11. 1947-54 Chevy Pickup Rear Dropmember, Coilovers

    The 1947-54 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

    Learn More
    $2,999.00
  12. 1973-87 Chevy Pickup Rear Dropmember, Level 1 Coilovers

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

    Learn More
    $2,399.00
  13. 1973-87 Chevy Pickup Rear Dropmember, Level 2 Coilovers

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

    Learn More
    $2,399.00
  14. 1973-87 C10 Longbed to Shortbed Conversion Kit
    1973-87 Longbed to Shortbed Conversion Kit
    Includes templates, c-channel supports, and frame plate.
    Welding is required. Learn More
    $399.00
  15. 1963-72 Chevy Pickup Rear Dropmember, Level 2 Coilovers

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

    Learn More
    $2,399.00
  16. 1963-72 Chevy Pickup Rear Dropmember, Level 1 Coilovers

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

    Learn More
    $2,399.00
  17. 1960-62 Chevy Pickup Rear Dropmember, Coilovers

    The Porterbuilt 1960-62 Rear coilover suspension system is a modular suspension system designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride height measures approx. 6” when running a 30” tall tire (measurements are taken from bottom of the cab to the ground).
    DOES require modification of the stock bed floor.
    All rear kits are compatible with both long and short bed trucks.
    Designed with inboard coilovers that can accommodate up to 10" Wide Wheels
    Learn More
    $2,399.00
  18. 1947-54 Chevy Pickup Front Dropmember, Coilovers

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,799.00
  19. 1955-59 Chevy Pickup Front Dropmember, Coilovers

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,799.00
  20. 1963-72 Chevy Pickup Front Dropmember, Level 2 Coilover

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

    Learn More
    $1,399.00
  21. 1963-72 Chevy Pickup Front Dropmember, Level 1 Coilover

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

    Learn More
    $1,399.00
  22. 1973-87 Chevy Pickup Front Dropmember, Level 1 Coilover

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

    Learn More
    $1,399.00
  23. 1973-87 Chevy Pickup Front Dropmember, Level 2 Coilover

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

    Learn More
    $1,399.00
  24. 1955-59 Chevy Transmission Crossmember

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1955-59 Chevy Trucks
    Learn More
    $119.00
  25. 1947-54 Chevy Transmission Crossmember

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1947-54 Chevy Trucks
    Learn More
    $119.00
  26. 1960-62 Chevy Pickup Front Dropmember, Coilovers

    The 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,399.00
  27. 1960-62 Chevy Transmission Crossmember

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Note: The tabs are loose and "unwelded".

    Fits: 1960-62 Chevy Trucks
    Learn More
    $119.00
  28. 1963-87 Chevy Transmission Crossmember

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-87 Chevy C10, C20, C30 Trucks
    Learn More
    $119.00
  29. 1960-62 Inner Frame Stiffener, 2 Piece Driveshaft

    New Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1960-62 Dropmember Equipped Chevy Trucks
    Learn More
    $1,499.00
  30. Brake Booster Kit - 1967-72 C10
    7" Dual Diaphragm Brake Booster with Wilwood Aluminum Tandem Master Cylinder Kit
    Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
    Includes proportioning valve and bracket Learn More
    $554.28
  31. Brake Booster Kit - 1960-66 C10
    7" Dual Diaphragm Brake Booster with Wilwood Aluminum Tandem Master Cylinder Kit
    Available in zinc or chrome finish with a standard, black, or ball-burnished master cylinder
    Includes proportioning valve and bracket Learn More
    $549.28
  32. 1947-54 Boxed Inner Frame Stiffener, 2 Piece Driveshaft

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1947-54 Dropmember Equipped Chevy Trucks
    Learn More
    $1,499.00
  33. 1955-59 Boxed Inner Frame Stiffener, 2 Piece Driveshaft

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1955-59 Dropmember Equipped Chevy Trucks
    Learn More
    $1,499.00
  34. 1963-72 Boxed Inner Frame Stiffener, 2 Piece Driveshaft

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1963-72 Dropmember Equipped Chevy Trucks
    Learn More
    $1,499.00
  35. 1973-87 Boxed Inner Frame Stiffener, 2 Piece Driveshaft

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1973-87 Chevy Trucks
    Learn More
    $1,499.00
  36. 1947-54 Chevy Pickup Rear Dropmember, Airbag

    The 1947-54 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body

    Learn More
    $2,999.00
  37. 1960-62 Chevy Pickup Rear Dropmember, Airbag

    The 1960-62 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

    Learn More
    $2,399.00
  38. 1955-59 Chevy Pickup Rear Dropmember, Airbag

    The 1955-59 Chevy Pickup Rear Airbag Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

    Learn More
    $2,399.00
  39. 1963-72 Boxed Inner Frame Stiffener, 1 Piece Driveshaft

    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks

    Fits: 1963-72 Chevy Trucks
    Learn More
    $1,499.00
  40. Firestone F9000 Air Spring Kit (Includes 2 air springs)

    This standard Firestone air spring offers maximum load support and operates at up to 100 psi. The spring has a 1/4" inflation port, a ride height of 8.25" and a maximum diameter of 5.70".

    * Includes 2 air springs

    Learn More
    $200.00
  41. Airlift 3H Air Management System (27695)

    Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.

    Learn More
    $2,125.00
  42. 1973-87 Chevy Pickup Rear Dropmember , Level 3 Airbag

    The 1973-87 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  43. 1969-72 Chevy Blazer 2WD Rear Dropmember , Level 3 Airbag

    The 1963-72 Chevy Blazer 2WD Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  44. 1969-72 Chevy Blazer 4WD Rear Dropmember , Level 3 Airbag

    The 1963-72 Chevy Blazer 4WD Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  45. 1963-72 Chevy Pickup Rear Dropmember , Level 3 Airbag

    The 1963-72 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $2,399.00
  46. Airlift 3P Air Management System (27685)

    Air Lift Performance 3P combines pressure-based control with the ability to add ride-height sensing technology with the upgrade to height sensors. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.

    Learn More
    $1,655.00
  47. 1973-87 Boxed Inner Frame Stiffener, 1 Piece Driveshaft - Driver Side Cat, 5.5" Exhaust
    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks
    Driver Side Catalytic Converter Specific
    FEATURES LARGE 5.5" EXHAUST CUTOUTS Learn More
    $1,499.00
  48. 1963-72 Chevy Pickup Rear Back Half Kit, Level 2 Coilover

    The Dropmember Rear Back Half suspension system is engineered fit 12-15" wide wheels.
    Fits 1963-72 C10 Trucks
    Level 2, Touring

    Ride height measures approx. 5” when running a 30” tall tire.

    DESIGNED FOR 12"-15" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  49. 1960-62 Chevy Pickup Rear Back Half Kit, Level 2 Coilover

    The Dropmember Rear Back Half suspension system is engineered fit 12" wide wheels.
    Fits 1960-62 C10 Trucks
    Level 2, Touring

    Ride height measures approx. 5” when running a 30” tall tire.

    DESIGNED FOR 12" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  50. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15303

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    13.06" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    17" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 PRO SPINDLES

    Learn More
    As low as $1,834.74
  51. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15304

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    14" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    18" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 PRO SPINDLES

    Learn More
    As low as $2,118.49
  52. Viair 444C 200 PSI Dual Value Pack - Black

    All Viair 444C compressors feature a head assembly that includes a newly-developed, patents pending intercooler head. Additionally, they are equipped with a stainless steel braided leader hose with inline check valve assembly that serves to protect the compressor by eliminating the possibility of high amperage restarts.

    Learn More
    $339.95
  53. 1963-72 Chevy Pickup Rear Dropmember , Level 1 Airbag

    The 1963-72 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

    Learn More
    $2,399.00
  54. 1973-87 Chevy Pickup Rear Dropmember , Level 1 Airbag

    The 1973-87 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

    Learn More
    $2,399.00
  55. 1955-59 Chevy Pickup Front Dropmember, Airbag

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,799.00
  56. 1947-54 Chevy Pickup Front Dropmember, Airbag

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,799.00
  57. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15942

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    14" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    18" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $2,252.36
  58. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15941

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    13" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    17" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $1,955.49
  59. 1960-62 Chevy Pickup Front Dropmember, Airbag

    The 1960-62 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  60. FLO Airride Billet Tank, 28"
    FLO Airride Billet Tank, 28"
    Dimensions: 28" Long x 6" Deep x 6-3/4" Tall
    End Ports: Two 1/4", Two 3/8", One 1/8"
    Drain Port: One 1/8" Learn More
    $335.00
  61. 1963-72 Chevy Pickup Front Dropmember, Level 3 Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  62. 1973-87 Chevy Pickup Front Dropmember, Level 3 Airbag

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  63. 1973-87 Chevy Pickup Front Dropmember, Level 1 Airbag

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  64. 1963-72 Chevy Pickup Front Dropmember, Level 1 Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  65. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors, 6 Lug - 140-15946

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    6 Lug
    14" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    18" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $2,295.68
  66. 1961-64 Ford F100 Front Dropmember

    The Dropmember Level 3 61-64 Ford F100 Front suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.


    Learn More
    $1,999.00
  67. 1963-72 Stage 2 Deluxe Rear Kit - Airbag

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    $2,399.00
  68. Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors - 140-10094
    Wilwood Forged Dynalite Rear Brake Kit
    12.19" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Large Chevy C10 Rear End Axle, 2,42 Offset
    15" Minimum Wheel Diameter Learn More
    As low as $978.86
  69. Wilwood D154 Rear Brake Kit, 12.19" Rotors - 140-12569
    Wilwood D154 Rear Brake Kit
    12.19" Rotors, SRP Drilled & Slotted Available
    2 Piston Calipers, Red or Black Available
    Large Chevy C10 Rear End Axle, 2,42 Offset
    16" Minimum Wheel Diameter
    Learn More
    As low as $897.68
  70. Wilwood D154 Rear Brake Kit, 12.19" Rotors - 140-12209
    Wilwood D154 Rear Brake Kit
    12.19" Rotors, SRP Drilled & Slotted Available
    2 Piston Calipers, Red or Black Available
    Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
    16" Minimum Wheel Diameter
    Learn More
    As low as $897.68
  71. Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors, 6 Lug - 140-16712
    Wilwood Forged Dynalite Rear Parking Brake Kit
    12.19" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Large Chevy C10 Rear End Axle, 2.46 Offset
    15" Minimum Wheel Diameter Learn More
    As low as $1,090.11
  72. PB Fab Swaybar, Early Dropmember Applications

    The new Porterbuilt sway bar is manufactured in-house and is available for early Dropmember equipped trucks. It comes raw and includes all mounting hardware.

    Learn More
    $349.00
  73. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors - 140-15302

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    12.19" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    15" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 PRO SPINDLES

    Learn More
    As low as $1,089.49
  74. Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit, 14" Rotors - 140-10012
    Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit
    14" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
    18" Minimum Wheel Diameter Learn More
    As low as $2,118.49
  75. Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit, 12.88" Rotors - 140-9219
    Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit
    12.88" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
    17" Minimum Wheel Diameter Learn More
    As low as $1,947.24
  76. Wilwood Forged Narrow Superlite 4R Rear Brake Kit, 12.88" Rotors - 140-10093
    Wilwood Forged Narrow Superlite 4R Rear Brake Kit
    12.88" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Large Chevy C10 Rear End Axle, 2,42 Offset
    17" Minimum Wheel Diameter Learn More
    As low as $1,947.24
  77. Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors - 140-11385
    Wilwood Forged Dynapro Low-Profile Rear Brake Kit
    11" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Large Chevy C10 Rear End Axle, 2,42 Offset
    14" Minimum Wheel Diameter Learn More
    As low as $978.86
  78. Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors, 6 Lug - 140-16711
    Wilwood Forged Dynapro Low-Profile Rear Brake Kit
    6 Lug
    11" Rotors, SRP Drilled & Slotted Available
    4 Piston Calipers, Red or Black Available
    Large Chevy C10 Rear End Axle, 2.46 Offset
    14" Minimum Wheel Diameter Learn More
    As low as $1,092.61
  79. PB Fab Swaybar, Factory Crossmember

    The new Porterbuilt sway bar is manufactured in-house and is available for trucks equipped with PB Fab control arms and the factory crossmember. It comes raw and includes all mounting hardware.

    Learn More
    $349.00
  80. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors, 6 Lug - 140-15945

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    6 Lug
    13" Rotors, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    17" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $2,023.74
  81. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors - 140-15940

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    15" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $1,283.30
  82. Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors, 6 Lug - 140-15944

    Wilwood Forged Narrow Superlite 6R Front Brake Kit
    6 Lug
    12" 1 Piece Rotor and Hats, SRP Drilled & Slotted Available
    6 Piston Calipers, Red or Black Available
    15" Minimum Wheel Diameter

    * FOR USE WITH WILWOOD C10 STEEL SPINDLES

    Learn More
    As low as $1,321.61
  83. Accuair Premium Air Suspension Package
    The Accuair Premium Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, and height sensors. This is the perfect mid-level kit for anyone looking to get a high-quality air management system and programmable ride heights at an affordable price. Learn More
    $2,999.99
  84. Accuair Ultimate Air Suspension Package
    AccuAir’s Ultimate Package is going to include an ENDO-VT air tank, an e+ Connect which includes an ECU+, wireless switch box, an e-Level+ app, ride height sensors, and a TouchPad+. This is the perfect top-of-the-line kit for anyone looking to get the best components for their air suspension management. Learn More
    $3,499.99
  85. 1963-72 Chevy Pickup Rear Back Half Kit, Level 3 Airbag

    The Dropmember Rear Back Half suspension system is engineered to lay frame with 12-15" wide wheels.
    Fits 1963-72 C10 Trucks
    Level 3, Extreme

    Ride height measures approx. 5” and the frame will rest on the ground when deflated.

    DESIGNED FOR 12"-15" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  86. 1960-62 Chevy Pickup Rear Back Half Kit, Level 3 Airbag

    The Dropmember Rear Back Half suspension system is engineered to lay frame with 12" wide wheels.
    Fits 1960-62 C10 Trucks
    Level 3, Extreme

    Ride height measures approx. 5” when running a 30” tall tire, and the frame will rest on the ground when deflated.

    DESIGNED FOR 12" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


    Learn More
    $3,999.00
  87. CPP Modular Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5
    CPP Modular Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted Available
    2 Piston Calipers
    18" Minimum Wheel Diameter Learn More
    $799.00
  88. CPP Modular Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5
    CPP Modular Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted Available
    2 Piston Calipers, Wilwood Upgrade Available
    18" Minimum Wheel Diameter Learn More
    $799.00
  89. CPP Modular Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5
    CPP Modular Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted Available
    2 Piston Calipers, Wilwood Upgrade Available
    18" Minimum Wheel Diameter Learn More
    $799.00
  90. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5WWB
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Black Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  91. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1963-70 C10 - 6370SWBK-5WWR
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Red Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  92. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5WWR
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Red Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  93. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1971-72 C10 - 7172SWBK-5WWB
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Black Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  94. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5WWB
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Black Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  95. CPP Modular Drop Spindle Front Brake Kit, 12" Rotors, 1973-87 C10 - 7387SWBK-5WWR
    CPP Modular Drop Spindle Front Brake Kit
    12" Rotors, Drilled & Slotted
    Wilwood 2 Piston Red Calipers
    18" Minimum Wheel Diameter Learn More
    $1,199.00
  96. Boyd Aluminum Fuel Tank, Side Fill, EFI Aeromotive Stealth 340 Pump - 1963-72 C10

    Product Number: 14003
    Approx 19 Gallons

    1963-72 Chevy C10
    Side Fill
    Aeromotive In-Tank Pump

    Learn More
    $720.00
  97. Boyd Aluminum Fuel Tank, Bed Fill, EFI Aeromotive Stealth Pump - 1963-72 C10

    Product Number: 14004
    Approx 19 Gallons

    1963-72 Chevy C10
    Bed Fill
    Aeromotive In-Tank Pump

    Learn More
    $720.00
Filter
Set Ascending Direction

101 items

Page
per page
View as List Grid