Search results for: 'trac'

Filter
Set Ascending Direction

22 Items

per page
View as List Grid
Did you mean
trail
Related search terms
trac+bar+and+1>1
trac+bar+and+1=1
Track bar mounting bracket
Trac-Bar Kit
trac bar kit
  1. 1963-72 Fully Adjustable Trac-Bar Kit

    If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!

    Learn More
    $299.00
  2. 1963-72 Stage 2 Deluxe Rear Kit - Airbag

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    $2,399.00
  3. 1960-62 Chevy Pickup Front Dropmember, Coilovers

    The 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

    Learn More
    $1,399.00
  4. 1955-59 Chevy Pickup Rear Dropmember, Coilovers

    The 1955-59 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

    Learn More
    $2,399.00
  5. 1947-54 Chevy Pickup Rear Dropmember, Coilovers

    The 1947-54 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

    Learn More
    $2,999.00
  6. 1973-87 Chevy Pickup Rear Dropmember, Level 1 Coilovers

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

    Learn More
    $2,399.00
  7. 1973-87 Chevy Pickup Rear Dropmember, Level 2 Coilovers

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

    Learn More
    $2,399.00
  8. 1963-72 Chevy Pickup Rear Dropmember, Level 2 Coilovers

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

    Learn More
    $2,399.00
  9. 1963-72 Chevy Pickup Rear Dropmember, Level 1 Coilovers

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

    Learn More
    $2,399.00
  10. 1963-72 Chevy Pickup Front Dropmember, Level 2 Coilover

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

    Learn More
    $1,399.00
  11. 1963-72 Chevy Pickup Front Dropmember, Level 1 Coilover

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

    Learn More
    $1,399.00
  12. 1973-87 Chevy Pickup Front Dropmember, Level 1 Coilover

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

    Learn More
    $1,399.00
  13. 1973-87 Chevy Pickup Front Dropmember, Level 2 Coilover

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

    Learn More
    $1,399.00
  14. 1960-62 Chevy Pickup Rear Dropmember, Coilovers

    The Porterbuilt 1960-62 Rear coilover suspension system is a modular suspension system designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride height measures approx. 6” when running a 30” tall tire (measurements are taken from bottom of the cab to the ground).
    DOES require modification of the stock bed floor.
    All rear kits are compatible with both long and short bed trucks.
    Designed with inboard coilovers that can accommodate up to 10" Wide Wheels
    Learn More
    $2,399.00
  15. 1960-62 Chevy Pickup Front Dropmember, Airbag

    The 1960-62 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  16. 1963-72 Chevy Pickup Front Dropmember, Level 3 Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  17. 1973-87 Chevy Pickup Front Dropmember, Level 3 Airbag

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

    Learn More
    $1,399.00
  18. 1973-87 Chevy Pickup Front Dropmember, Level 1 Airbag

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  19. 1963-72 Chevy Pickup Front Dropmember, Level 1 Airbag

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

    Learn More
    $1,399.00
  20. 1963-72 Chevy Pickup Rear Dropmember , Level 1 Airbag

    The 1963-72 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

    Learn More
    $2,399.00
  21. 1963-72 Stage 2 Deluxe Rear Kit - Coilovers

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

    Learn More
    $2,199.00
  22. 1961-64 Ford F100 Rear Dropmember
    The Porterbuilt Level 3 61-64 Ford F100 Rear suspension system is a modular suspension system engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)
    Learn More
    $2,399.00
Filter
Set Ascending Direction

22 Items

per page
View as List Grid