Chassis / Suspension

Desc
per page

Items 41-60 of 109

View as List Grid
  1. 1963-72 Trailing Arm Crossmember, 1 Piece Driveshaft
    $299.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  2. 1963-72 Panhard Bar Crossmember
    $99.00

    Tubular panhard bar crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  3. 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft, Boxed
    $349.00

    Boxed trailing arm crossmember built using 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  4. 1963-72 Rear Frame Crossmember, Tubular
    $99.00

    Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  5. 1947-54 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1947-54 Dropmember Equipped Chevy Trucks
  6. 1955-59 Raised Bed Floor Mounts
    $599.00
    Raised Bed Floor Mounts for 1955-59 Dropmember Equipped Trucks
  7. 1947-54 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1947-54 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body

  8. 1947-54 Chevy Pickup Front Dropmember, Airbag
    $1,799.00

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  9. Porterbuilt Tubular Control Arms Factory Crossmember, 1" Narrowed
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shoafts, bushings, and Grade 8 hardware for installation.

  10. 1963-87 Stage 1 Front Kit
    $549.00

    Looking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace the factory steel coil spring with an air spring while maintaining the factory control arms.

  11. Shock Kit (Sold in pairs)
    $125.00

    Replacement Shock Kit

    Applications:
    Dropmember Level 1, Dropmember Level 2, Dropmember Level 3
    Stage 1 Front, Stage 2 Front
    Stage 1 Rear, Stage 2 Rear Basic, Stage 2 Rear Deluxe

  12. 1955-59 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1955-59 Dropmember Equipped Chevy Trucks
  13. Porterbuilt Tubular Control Arms Factory Crossmember, 1" Forward
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

  14. 1960-62 Raised Bed Floor Mounts
    $649.00
    Raised Bed Floor Mounts for 1960-62 Dropmember Equipped Trucks
  15. 1947-54 Chevy Pickup Rear Dropmember, Coilovers
    $2,299.00

    The 1947-54 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

  16. Ridetech Handling Quality ("HQ") Coil-Over Series
    $700.00
    The HQ coil-over allows the driver to tune and adjust the shock performance and/or ride quality at the turn of a knob located on the shock body. The HQ series is a rebound single adjustable shock.
    Designed to be used with Porterbuilt Suspension components.
    Sold in pairs and includes spring.
  17. 1947-54 Chevy Pickup Front Dropmember, Coilovers
    $1,799.00

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

  18. 1963-72 Stage 1 Rear Kit
    $549.00

    The stage 1 rear kit is both an economical and easy way to lower the rear of your 63-72 C10′s trailing arm suspension. The air spring and mounting plates replace the factory steel coil spring, allowing a better ride quality and adjustability! Our Stage 1 shock relocator brackets improve shock function by decreasing the shock angle!

Desc
per page

Items 41-60 of 109

View as List Grid
To Top