Shop By Category

Desc
per page

Items 81-100 of 169

View as List Grid
  1. 1963-87 Upper Shock Relocator Bracket
    $89.00
    Upper Shock Relocator Bracket for trucks with factory front crossmember.
  2. 1963-72 Trailing Arm Crossmember, 1 Piece Driveshaft
    $299.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  3. 1963-72 Panhard Bar Crossmember
    $99.00

    Tubular panhard bar crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  4. 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft, Boxed
    $349.00

    Boxed trailing arm crossmember built using 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  5. 1963-72 Rear Frame Crossmember, Tubular
    $99.00

    Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  6. Firestone F9000 Air Spring Kit (Includes 2 air springs)
    $150.00

    This standard Firestone air spring offers maximum load support and operates at up to 100 psi. The spring has a 1/4" inflation port, a ride height of 8.25" and a maximum diameter of 5.70".

    * Includes 2 air springs

  7. Air Lift Dominator 2600 Air Bag Kit (Includes 2 air bags)
    $158.00

    Air Lift Performance is proud to announce the second model from the brand new Dominator series line of air springs: the Dominator D2600!

    *Includes 2 air bags

  8. 1947-54 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1947-54 Dropmember Equipped Chevy Trucks
  9. 1955-59 Raised Bed Floor Mounts
    $599.00
    Raised Bed Floor Mounts for 1955-59 Dropmember Equipped Trucks
  10. 1947-54 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1947-54 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body

  11. 1947-54 Chevy Pickup Front Dropmember, Airbag
    $1,799.00

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  12. Airlift 3H Air Management System
    $1,785.00

    Air Lift Performance 3H combines pressure-based control with ride-height sensing technology. While both types of air management have been utilized before, this is the first product to harness the benefits of both sytems – instantly improving suspension control, performance, and vehicle ride flexibility.

  13. Boyd Aluminum Fuel Tank, Bed Fill, Non-EFI - 1963-72 C10
    $369.00

    Product Number: 14001
    Approx 19 Gallons

    1963-72 Chevy C10
    Standard
    Bed Fill
    Non-EFI

    * Shown With Optional Rollover Vent and Sending Unit Installed.

  14. Porterbuilt Tubular Control Arms Factory Crossmember, 1" Narrowed
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shoafts, bushings, and Grade 8 hardware for installation.

  15. Unisteer Power Rack & Pinion, Standard Ratio (8010020)
    $424.00

    Power Rack & Pinion
    This kit has everything you need to switch over to a standard ratio power rack & pinion. This kit is rebuilt to be better than new.

  16. 1963-87 Stage 1 Front Kit
    $549.00

    Looking for an easy way to switch over to air suspension without breaking the bank? The Stage 1 front kit is an inexpensive and simple way to do just that! The Stage 1 front kit is designed to replace the factory steel coil spring with an air spring while maintaining the factory control arms.

  17. Shock Kit (Sold in pairs)
    $125.00

    Replacement Shock Kit

    Applications:
    Dropmember Level 1, Dropmember Level 2, Dropmember Level 3
    Stage 1 Front, Stage 2 Front
    Stage 1 Rear, Stage 2 Rear Basic, Stage 2 Rear Deluxe

  18. 1955-59 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1955-59 Dropmember Equipped Chevy Trucks
Desc
per page

Items 81-100 of 169

View as List Grid
To Top