Chevy / GMC Truck

Desc
per page

Items 41-60 of 96

View as List Grid
  1. 1963-72 Chevy Pickup Front Dropmember, Level 3 Airbag
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  2. PB Fab Swaybar, Version 7 Dropmember
    $289.00

    The new Porterbuilt sway bar is manufactured in-house and is available for Version 7 Dropmember equipped trucks. It comes raw and includes all mounting hardware.

  3. 1967-72 Hood Hinge Gas Assist Upgrade
    $189.00
    67-72 Hood Hinge Gas Assist Upgrade

    THIS KIT IS AN UPGRADE FOR STANDARD PORTERBUILT HOOD HINGES.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
  4. Porterbuilt Tubular Control Arms Factory Crossmember, 1" Narrowed
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shoafts, bushings, and Grade 8 hardware for installation.

  5. 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft
    $299.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  6. 1963-87 Stage 2 Deluxe Front Kit
    $1,749.00

    If you are looking for the best possible kit to convert your truck to air suspension but maintain your factory front crossmember, this is the kit for you. The Porterbuilt Stage 2 Deluxe Front Kit for '63-'87 Chevy Trucks replaces your factory control arms and coil springs, lowering your truck and improving handling, without replacing the factory front crossmember.

  7. 1963-87 Stage 2 Basic Front Kit
    $1,399.00

    The Porterbuilt Stage 2 Basic Front Kit for '63-'87 Chevy Trucks improves ride quality and overall driveability by replacing the factory lower control arms and and factory coil spring with an air spring.

  8. 1963-72 Stage 2 Deluxe Rear Kit - Airbag
    $2,099.00

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

  9. 1963-72 Fully Adjustable Trac-Bar Kit
    $229.00

    If you are thinking about lowering your C10 truck more than four inches in the rear, a longer trac-bar will be a necessity! The Porterbuilt Fully Adjustable Trac-bar has an overall length of just over 34 inches. The longer the bar, the less side to side shift the differential will experience through suspension travel. The new mounting brackets also relocate the bar lowering the rear roll-center, and the bar length can be tuned while still mounted on the truck!

  10. 1967-72 Cowl Mounted Hood Hinges, Standard
    $299.00

    The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed. They are available for model years 1960-1972 and start at $299 for the non-gas assist, or $399 with gas assist (this option is currently only available for the 67-72 trucks).

    The non-gas assist version can later be upgraded to gas assist for $189.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
  11. 1967-72 Chevy Truck Cowl Mounted Hood Hinges, Gas Assisted
    $399.00

    The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed. They are available for model years 1960-1972.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
  12. 1967-72 Chevy Truck Core Support Crossmember
    $99.00

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1967-72 Chevy Trucks
  13. 1973-87 C10 Ball Joints
    $109.00

    Performance Ball Joints for 1963-70 Chevy C10

  14. 1971-72 C10 Ball Joints
    $119.00
    Performance Ball Joints for 1963-70 Chevy C10
    Includes 2 upper and 2 lower ball joints
  15. 1963-70 C10 Ball Joints
    $99.00
    Performance Ball Joints for 1963-70 Chevy C10
    Includes 2 upper and 2 lower ball joints.
  16. 1963-87 Chevy Transmission Crossmember
    $99.00

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-87 Chevy C10, C20, C30 Trucks
  17. 1963-87 Upper Shock Relocator Bracket
    $89.00
    Upper Shock Relocator Bracket for trucks with factory front crossmember.
  18. 1963-72 Trailing Arm Crossmember, 1 Piece Driveshaft
    $299.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
Desc
per page

Items 41-60 of 96

View as List Grid
To Top