Shop By Vehicle

Desc
per page

Items 1-20 of 82

View as List Grid
Page
  1. Porterbuilt C30 Tubular Control Arms - Factory Crossmember
    $1,099.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Available in the following configurations:
    1" Forward
    1" Narrowed
    1" Forward & 1" Narrowed
    Standard Length

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    C30 SPECIFIC

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

  2. 1973-87 Chevy C30 Rear Dropmember , Level 3 Airbag
    $2,799.00

    The 1973-87 Chevy C30 Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

  3. 1973-87 Chevy C30 Front Dropmember, Level 3 Airbag
    $1,499.00

    The 1973-87 Chevy C30 Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with our C30 specific 3” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  4. 1963-72 Rear Frame Crossmember, Boxed
    $149.00

    New boxed rear frame crossmember fabricated from 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  5. 1973-87 Rear Frame Crossmember, Tubular
    $99.00

    Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1973-87 Chevy Trucks
  6. PB Fab Swaybar, Factory Crossmember & Early Dropmember Applications
    $289.00

    The new Porterbuilt sway bar is manufactured in-house and is available for factory crossmember and early Dropmember equipped trucks. It comes raw and includes all mounting hardware.

  7. 1973-87 Carrier Bearing Crossmember, Boxed
    $329.00

    Boxed carrier bearing crossmember built using 3/16" steel.

    Fits: 1973-87 Chevy Trucks
  8. 1963-72 Boxed Trailing Arm Crossmember, 1 Piece Driveshaft
    $349.00

    Boxed trailing arm crossmember built using 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  9. 1973-87 Chevy Truck Core Support Crossmember
    $99.00

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1973-87 Chevy Trucks
  10. 1963-66 Chevy Truck Core Support Crossmember
    $99.00

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-66 Chevy Trucks
  11. 1963-72 Boxed Inner Frame Stiffener, 1 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks

    Fits: 1963-72 Chevy Trucks
  12. 1973-87 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1973-87 Chevy Trucks
  13. Porterbuilt Tubular Control Arms Dropmember, 1'' Narrowed
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

  14. Porterbuilt Tubular Control Arms - Factory Crossmember
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Available in the following configurations:
    1" Forward
    1" Narrowed
    1" Forward & 1" Narrowed
    Standard Length

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

  15. 1973-87 Chevy Pickup Rear Dropmember, Level 2 Coilovers
    $2,299.00

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

  16. 1973-87 Chevy Pickup Rear Dropmember, Level 1 Coilovers
    $2,299.00

    The 1973-87 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

  17. 1963-72 Chevy Pickup Rear Dropmember, Level 1 Coilovers
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

  18. 1973-87 Chevy Pickup Rear Dropmember , Level 3 Airbag
    $2,299.00

    The 1973-87 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

  19. 1973-87 Chevy Pickup Rear Dropmember , Level 1 Airbag
    $2,299.00

    The 1973-87 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

  20. 1963-72 Chevy Pickup Rear Dropmember , Level 1 Airbag
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

Desc
per page

Items 1-20 of 82

View as List Grid
Page
To Top