Shop By Vehicle

Desc
per page

Items 21-40 of 91

View as List Grid
  1. 1973-87 Chevy Pickup Front Dropmember, Level 2 Coilover
    $1,299.00

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

  2. 1973-87 Chevy Pickup Front Dropmember, Level 1 Coilover
    $1,299.00

    The 1973-87 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

  3. 1963-72 Chevy Pickup Front Dropmember, Level 1 Coilover
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

  4. 1973-87 Chevy Pickup Front Dropmember, Level 1 Airbag
    $1,299.00

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

  5. 1963-72 Chevy Pickup Front Dropmember, Level 1 Airbag
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

  6. 1963-72 Chevy Pickup Rear Dropmember , Level 3 Airbag
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

  7. 1963-72 Carrier Bearing Crossmember
    $249.00

    Tubular carrier bearing crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  8. 1963-72 Trailing Arm Crossmember, No Tabs
    $249.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  9. 1963-72 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1963-72 Dropmember Equipped Chevy Trucks
  10. 1963-72 Chevy Pickup Rear Dropmember, Level 2 Coilovers
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

  11. 1963-72 Chevy Pickup Front Dropmember, Level 2 Coilover
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

  12. 1973-87 Raised Bed Floor Mounts
    $549.00
    Raised Bed Floor Mounts for 1973-87 Dropmember Equipped Trucks
  13. 1963-72 Raised Bed Floor Mounts
    $549.00
    Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
  14. 1963-72 Chevy Pickup Rear Back Half Kit, Level 3 Airbag
    $3,499.00

    The Dropmember Rear Back Half suspension system is engineered to lay frame with a 15" wide wheel.
    Level 3, Extreme
    Ride height measures approx. 5” when running a 30” tall tire, and the frame will rest on the ground when deflated.

    DESIGNED FOR 15" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


  15. 1973-87 Chevy Pickup Front Dropmember, Level 3 Airbag
    $1,299.00

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  16. 1963-72 Chevy Pickup Front Dropmember, Level 3 Airbag
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  17. PB Fab Swaybar, Version 7 Dropmember
    $289.00

    The new Porterbuilt sway bar is manufactured in-house and is available for Version 7 Dropmember equipped trucks. It comes raw and includes all mounting hardware.

  18. 1967-72 Hood Hinge Gas Assist Upgrade
    $189.00
    67-72 Hood Hinge Gas Assist Upgrade

    THIS KIT IS AN UPGRADE FOR STANDARD PORTERBUILT HOOD HINGES.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
  19. 1963-72 Trailing Arm Crossmember, 2 Piece Driveshaft
    $299.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  20. 1963-87 Stage 2 Deluxe Front Kit
    $1,749.00

    If you are looking for the best possible kit to convert your truck to air suspension but maintain your factory front crossmember, this is the kit for you. The Porterbuilt Stage 2 Deluxe Front Kit for '63-'87 Chevy Trucks replaces your factory control arms and coil springs, lowering your truck and improving handling, without replacing the factory front crossmember.

Desc
per page

Items 21-40 of 91

View as List Grid
To Top