Shop By Vehicle

Desc
per page

Items 61-80 of 91

View as List Grid
  1. 1947-54 Chevy Pickup Front Dropmember, Airbag
    $1,799.00

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  2. 1960-62 Chevy Pickup Front Dropmember, Airbag
    $1,299.00

    The 1960-62 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  3. 1955-59 Chevy Pickup Front Dropmember, Airbag
    $1,799.00

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  4. 1960-62 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1960-62 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

  5. 1947-54 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1947-54 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body

  6. 1955-59 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1955-59 Chevy Pickup Rear Airbag Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

  7. 1960-62 Chevy Pickup Front Dropmember, Coilovers
    $1,299.00

    The 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

  8. 1955-59 Chevy Pickup Front Dropmember, Coilovers
    $1,799.00

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

  9. 1947-54 Chevy Pickup Front Dropmember, Coilovers
    $1,799.00

    The 1947-54 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

  10. 1960-62 Chevy Pickup Rear Dropmember, Coilovers
    $2,299.00

    The Porterbuilt 1960-62 Rear coilover suspension system is a modular suspension system designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride height measures approx. 6” when running a 30” tall tire (measurements are taken from bottom of the cab to the ground).
    DOES require modification of the stock bed floor.
    All rear kits are compatible with both long and short bed trucks.
    Designed with outboard coilovers that can accommodate up to 12" Wide Wheels
  11. 1947-54 Chevy Pickup Rear Dropmember, Coilovers
    $2,299.00

    The 1947-54 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

  12. 1955-59 Chevy Pickup Rear Dropmember, Coilovers
    $2,299.00

    The 1955-59 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

  13. 1960-62 Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1960-62 Dropmember Equipped Chevy Trucks
  14. 1947-54 Chevy Transmission Crossmember
    $99.00

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1947-54 Chevy Trucks
  15. 1955-59 Chevy Transmission Crossmember
    $99.00

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1955-59 Chevy Trucks
  16. 1955-59 Chevy Truck Core Support Crossmember
    $99.00

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1955-59 Chevy Trucks
  17. 1960-62 Chevy Transmission Crossmember
    $99.00

    Tubular transmission crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Note: The tabs are loose and "unwelded".

    Fits: 1960-62 Chevy Trucks
  18. 1947-54 Rear Frame Crossmember, Boxed
    $149.00

    New boxed rear frame crossmember fabricated from 3/16" steel.

    Fits: 1947-54 Chevy Trucks
  19. 1955-59 Rear Frame Crossmember, Tubular
    $99.00

    Tubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1955-59 Chevy Trucks
  20. 1960-66 Cowl Mounted Hood Hinges, Gas Assisted
    $399.00

    The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed. They are available for model years 1960-1972.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
Desc
per page

Items 61-80 of 91

View as List Grid
To Top