Shop By Vehicle

Desc
per page

Items 1-20 of 42

View as List Grid
Page
  1. Porterbuilt C30 Tubular Control Arms - Factory Crossmember
    $1,099.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Available in the following configurations:
    1" Forward
    1" Narrowed
    1" Forward & 1" Narrowed
    Standard Length

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    C30 SPECIFIC

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

  2. 1963-72 Rear Frame Crossmember, Boxed
    $149.00

    New boxed rear frame crossmember fabricated from 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  3. PB Fab Swaybar, Factory Crossmember & Early Dropmember Applications
    $289.00

    The new Porterbuilt sway bar is manufactured in-house and is available for factory crossmember and early Dropmember equipped trucks. It comes raw and includes all mounting hardware.

  4. 1963-72 Boxed Trailing Arm Crossmember, 1 Piece Driveshaft
    $349.00

    Boxed trailing arm crossmember built using 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  5. 1963-66 Chevy Truck Core Support Crossmember
    $99.00

    Tubular core support crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-66 Chevy Trucks
  6. Porterbuilt Battery Box, Passenger Side
    $149.00
    Battery Box for Optima Yellow Top
    Passenger Side
  7. Porterbuilt Battery Box, Driver Side
    $149.00
    Battery Box for Optima Yellow Top
    Driver Side
  8. 1963-72 Boxed Inner Frame Stiffener, 1 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks

    Fits: 1963-72 Chevy Trucks
  9. Porterbuilt Tubular Control Arms Dropmember, 1'' Narrowed
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

  10. Porterbuilt Tubular Control Arms - Factory Crossmember
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Available in the following configurations:
    1" Forward
    1" Narrowed
    1" Forward & 1" Narrowed
    Standard Length

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    NOTE: ALL CONTROL ARMS ARE DESIGNED TO USE PROFORGED BALL JOINTS. .

  11. 1963-72 Chevy Pickup Rear Dropmember, Level 1 Coilovers
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

  12. 1963-72 Chevy Pickup Rear Dropmember , Level 1 Airbag
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

  13. 1963-72 Chevy Pickup Front Dropmember, Level 1 Coilover
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

  14. 1963-72 Chevy Pickup Front Dropmember, Level 1 Airbag
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

  15. 1963-72 Chevy Pickup Rear Dropmember , Level 3 Airbag
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

  16. 1963-72 Carrier Bearing Crossmember
    $249.00

    Tubular carrier bearing crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  17. 1963-72 Trailing Arm Crossmember, No Tabs
    $249.00

    Tubular trailing arm crossmember built using thick-wall 1.5" tubing & 3/16" steel.

    Fits: 1963-72 Chevy Trucks
  18. 1960-66 Cowl Mounted Hood Hinges, Gas Assisted
    $399.00

    The Porterbuilt cowl mounted hood hinges are the perfect solution to relocating the hood hinges once the factory inner fender wells have been removed. They are available for model years 1960-1972.

    PRODUCTION TIME ON HOOD HINGES IS TYPICALLY 2-4 WEEKS
  19. 1963-72 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1963-72 Dropmember Equipped Chevy Trucks
  20. 1963-72 Chevy Pickup Rear Dropmember, Level 2 Coilovers
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

Desc
per page

Items 1-20 of 42

View as List Grid
Page
To Top