Chassis / Suspension

Desc
per page

Items 61-80 of 109

View as List Grid
  1. 1963-72 Boxed Inner Frame Stiffener, 1 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 1 Dropmember, Static & Stock Suspension Trucks

    Fits: 1963-72 Chevy Trucks
  2. Porterbuilt Tubular Control Arms Factory Crossmember, 1" Forward & 1" Narrowed
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

  3. 1963-72 Raised Bed Floor Mounts
    $549.00
    Raised Bed Floor Mounts for 1963-72 Dropmember Equipped Trucks
  4. Ridetech Track Quality ("TQ") Coil-Over Series
    $1,850.00
    The TQ coilover has a single rebound adjustment and a DUAL stage [high speed and low speed] compression adjustment. It uses a remote reservoir that is connected with a 30" braided line for easy installation in a variety of installation applications.
    Designed to be used with Porterbuilt Suspension components.
    Sold in pairs with spring.
  5. 1963-87 Stage 2 Basic Front Kit
    $1,399.00

    The Porterbuilt Stage 2 Basic Front Kit for '63-'87 Chevy Trucks improves ride quality and overall driveability by replacing the factory lower control arms and and factory coil spring with an air spring.

  6. 1955-59 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1955-59 Chevy Pickup Rear Airbag Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

  7. 1955-59 Chevy Pickup Front Dropmember, Airbag
    $1,799.00

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  8. Porterbuilt Tubular Control Arms Factory Crossmember, Standard Length
    $999.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

  9. 1963-72 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1963-72 Dropmember Equipped Chevy Trucks
  10. 1973-87 Raised Bed Floor Mounts
    $549.00
    Raised Bed Floor Mounts for 1973-87 Dropmember Equipped Trucks
  11. 1955-59 Chevy Pickup Front Dropmember, Coilovers
    $1,799.00

    The 1955-59 Chevy Pickup Front Dropmember suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
    When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

  12. 1955-59 Chevy Pickup Rear Dropmember, Coilovers
    $2,299.00

    The 1955-59 Chevy Pickup Rear Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 5-6"

  13. Porterbuilt C30 Tubular Control Arms Factory Crossmember, 1" Narrowed
    $1,099.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    C30 SPECIFIC

  14. 1973-87 Boxed Inner Frame Stiffener, 2 Piece Driveshaft
    $1,499.00

    New Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks

    Fits: 1973-87 Chevy Trucks
  15. 1960-62 Chevy Pickup Rear Dropmember, Airbag
    $2,299.00

    The 1960-62 Chevy Pickup Rear Dropmember suspension system is engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)

    Ride Height - 4"
    Deflated Height - Lay Body"

  16. 1960-62 Chevy Pickup Front Dropmember, Airbag
    $1,299.00

    The 1960-62 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  17. 1963-87 Stage 2 Deluxe Front Kit
    $1,749.00

    If you are looking for the best possible kit to convert your truck to air suspension but maintain your factory front crossmember, this is the kit for you. The Porterbuilt Stage 2 Deluxe Front Kit for '63-'87 Chevy Trucks replaces your factory control arms and coil springs, lowering your truck and improving handling, without replacing the factory front crossmember.

  18. Porterbuilt C30 Tubular Control Arms Factory Crossmember, 1" Forward
    $1,099.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    C30 SPECIFIC

  19. 1960-62 Chevy Pickup Front Dropmember, Coilovers
    $1,299.00

    The 1960-62 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front Coilover system will set the lowest point of the factory frame rails approx. 5-6" inches off the ground at ride height.

    Ride Height - 5-6"

  20. 1963-72 Stage 2 Deluxe Rear Kit - Airbag
    $2,099.00

    The Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!

Desc
per page

Items 61-80 of 109

View as List Grid
To Top