Search results for: 'chevy 1 to dual'
- Related search terms
- CHEVY/GMC TRUCK LONGBED TO SHORTBED CONVERSION
- CHEVY/GMC TRUCK LONGBED TO SHORT 2008 chevyBED CONVERSION
- CHEVY%252FGMC TRUCK LONGBED TO SHORTBED CONVERSION
- CHEVY/GMC TRUCK LONGBED TO SHOD CONVERSION
- CHEVY/GMC TRUCK LONGBED TO SHORTBED1990 CONVERSION
-
![]()
1960-62 Inner Frame Stiffener, 2 Piece DriveshaftNew Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks
Fits: 1960-62 Dropmember Equipped Chevy Trucks
Learn More$1,499.00 -
![]()
Wilwood 1973-87 C10 ProSpindle, 2.5" Drop - 831-14202Wilwood Chevy C10 Prospindle
2.5" Drop
Forged Aluminum
Sold in Pairs
* Uses 1973-87 Ball Joints Learn More$808.49 -
![]()
Wilwood 1963-70 C10 ProSpindle, 2.5" Drop - 831-14201Wilwood Chevy C10 Prospindle
2.5" Drop
Forged Aluminum
Sold in Pairs
* Uses 1973-87 Ball Joints Learn More$808.49 -
![]()
Wilwood 1963-70 C10 Steel ProSpindle, 2.5" Drop - 831-15931Wilwood Chevy C10 Steel Prospindle
2.5" Drop
Cast Steel
Sold in Pairs
* Uses 1973-87 Ball Joints Learn More$381.10 -
![]()
1963-72 Boxed Inner Frame Stiffener, 2 Piece DriveshaftNew Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks
Fits: 1963-72 Dropmember Equipped Chevy Trucks
Learn More$1,499.00 -
![]()
1947-54 Boxed Inner Frame Stiffener, 2 Piece DriveshaftNew Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks
Fits: 1947-54 Dropmember Equipped Chevy Trucks
Learn More$1,499.00 -
![]()
1955-59 Boxed Inner Frame Stiffener, 2 Piece DriveshaftNew Boxed Inner Frame Stiffener for Level 2 & Level 3 Dropmember Equipped Trucks
Fits: 1955-59 Dropmember Equipped Chevy Trucks
Learn More$1,499.00 -
![]()
Wilwood 1971-87 C10 Steel ProSpindle, 2.5" Drop - 831-15932Wilwood 1971-87 Chevy C10 Steel Prospindle
2.5" Drop
Cast Steel
Sold in Pairs
* Uses 1973-87 Ball Joints Learn More$381.10 -
![]()
Airlift 2.5 Gallon Aluminum Air Tank, Polished2.5 Gallon Aluminum Tank, Polished
Learn More$180.75 -
![]()
-
![]()
1963-87 Stage 2 Basic Front KitThe Porterbuilt Stage 2 Basic Front Kit for '63-'87 Chevy Trucks improves ride quality and overall driveability by replacing the factory lower control arms and and factory coil spring with an air spring.
Learn More$1,549.00 -
![]()
Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors - 140-10094Wilwood Forged Dynalite Rear Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
15" Minimum Wheel Diameter Learn MoreAs low as $978.86 -
![]()
Wilwood Forged Dynalite Rear Brake Kit, 12.19" Rotors, 6 Lug - 140-16712Wilwood Forged Dynalite Rear Parking Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2.46 Offset
15" Minimum Wheel Diameter Learn MoreAs low as $1,090.11 -
![]()
Wilwood Forged Narrow Superlite 4R Rear Brake Kit, 12.88" Rotors - 140-10093Wilwood Forged Narrow Superlite 4R Rear Brake Kit
12.88" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
17" Minimum Wheel Diameter Learn MoreAs low as $1,947.24 -
![]()
-
![]()
-
![]()
Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors - 140-11385Wilwood Forged Dynapro Low-Profile Rear Brake Kit
11" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2,42 Offset
14" Minimum Wheel Diameter Learn MoreAs low as $978.86 -
![]()
Wilwood Forged Dynapro Rear Brake Kit, 11" Rotors, 6 Lug - 140-16711Wilwood Forged Dynapro Low-Profile Rear Brake Kit
6 Lug
11" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Large Chevy C10 Rear End Axle, 2.46 Offset
14" Minimum Wheel Diameter Learn MoreAs low as $1,092.61 -
![]()
LS HeadersThese stainless steel headers are used with the Porterbuilt Level 3 Dropmember (Version 5, 6 & 7) when doing an LS swap.
Learn More$349.00 -
![]()
1963-72 Raised Bed Floor Mounts - AirbagRaised Bed Floor Mounts for 1963-72 Airbag Equipped Trucks
Available in 10" and 12" tall brackets
Designed to utilize factory crossbraces
FOR CUSTOM SIZES, PLEASE CALL OR EMAIL OUR SALES DEPARTMENT
(833) 378-3608 | sales@pbfab.com Learn More$749.00 -
![]()
1963-87 Stage 2 Deluxe Front KitIf you are looking for the best possible kit to convert your truck to air suspension but maintain your factory front crossmember, this is the kit for you. The Porterbuilt Stage 2 Deluxe Front Kit for '63-'87 Chevy Trucks replaces your factory control arms and coil springs, lowering your truck and improving handling, without replacing the factory front crossmember.
Learn More$2,049.00 -
![]()
Low Profile LT Swap Oil Pan KitLow Profile LT Oil Pan Kit
LT GEN V, A BODY, G BODY
Fits LT1, LT4, L83, L86, 5.3L, 6.2L
Dropmember Compatible Learn More$379.00 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors, 6 Lug - 140-15946Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,295.68 -
![]()
Wilwood Aluminum Master Cylinder w/Pushrod, 7/8" BoreWilwood’s 7/8" bore Tandem Aluminum Master Cylinder available in 3 finishes, plain, ball burnished, and black e-coat. Learn More$230.95 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors, 6 Lug - 140-15945Wilwood Forged Narrow Superlite 6R Front Brake Kit
6 Lug
13" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,023.74 -
![]()
Ridetech HQ Shock Kit (pair)The HQ (handling quality) Series shocks adds rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads! Designed to replace OEM Shock Absorbers. Learn More$510.00 -
![]()
Air Lift Dominator 2600 Air Bag Kit (Includes 2 air bags)Air Lift Performance is proud to announce the second model from the brand new Dominator series line of air springs: the Dominator D2600!
*Includes 2 air bags
Learn More$234.00 -
![]()
1963-70 CPP Modular™ Drop Spindles Only, pair - CP30106-21963-70 CPP Modular™ Drop Spindles Only, pair Learn More$325.00 -
![]()
1971-72 CPP Modular™ Drop Spindles Only, pair - CP30106-31971-72 CPP Modular™ Drop Spindles Only, pair Learn More$325.00 -
![]()
1973-87 CPP Modular™ Drop Spindles Only, pair - CP30106-41973-87 CPP Modular™ Drop Spindles Only, pair Learn More$325.00 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15942Wilwood Forged Narrow Superlite 6R Front Brake Kit
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $2,252.36 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15941Wilwood Forged Narrow Superlite 6R Front Brake Kit
13" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 STEEL SPINDLES
Learn MoreAs low as $1,955.49 -
![]()
1963-72 Panhard Bar CrossmemberTubular panhard bar crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$119.00 -
![]()
1963-72 Carrier Bearing CrossmemberTubular carrier bearing crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$329.00 -
![]()
1955-59 Rear Frame Crossmember, TubularTubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1955-59 Chevy Trucks
Learn More$119.00 -
![]()
1960-62 Rear Frame Crossmember, TubularTubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1960-62 Chevy Trucks
Learn More$119.00 -
![]()
1973-87 Rear Frame Crossmember, TubularTubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1973-87 Chevy Trucks
Learn More$119.00 -
![]()
1963-72 Rear Frame Crossmember, TubularTubular rear frame crossmember built using thick-wall 1.5" tubing & 3/16" steel.
Fits: 1963-72 Chevy Trucks
Learn More$119.00 -
![]()
1973-87 C10 Ball JointsPerformance Ball Joints for 1963-70 Chevy C10
PLEASE CALL OR EMAIL FOR AVAILABILITY Learn More$149.00 -
![]()
1963-70 C10 Ball JointsPerformance Ball Joints for 1963-70 Chevy C10
Includes 2 upper and 2 lower ball joints.
PLEASE CALL OR EMAIL FOR AVAILABILITY Learn More$149.00 -
![]()
1971-72 C10 Ball JointsPerformance Ball Joints for 1963-70 Chevy C10
Includes 2 upper and 2 lower ball joints
PLEASE CALL OR EMAIL FOR AVAILABILITY Learn More$149.00 -
![]()
1961-64 Ford F100 Front DropmemberThe Dropmember Level 3 61-64 Ford F100 Front suspension system is a modular bolt-in sub-frame assembly engineered to incorporate Porterbuilt and C10 based suspension components.
When combined with a 2.5” drop spindle, 28” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory sheet metal on the ground when fully deflated.
Learn More$1,999.00 -
![]()
PB Fab - Airlift 3H Billet Height Sensor Arms, Set of 4PB Fab Billet Aluminum Height Sensor Arms
Fits Airlift 3H Height Sensors
Includes 4 arms
Available in 3 options Learn More$99.00 -
![]()
Rear Frame Rail Assembly, 1963-72 C101963-72 C10 Rear Frame Rail Assembly for Level 2 & Level 3 Dropmember Equipped Trucks Learn More$499.00 -
![]()
Little Shop MFG 16" Front Brake Kit, 1963-87 C10 Trucks16" Big Brake Kit From Little Shop Manufacturing
Available with Wilwood 6 Piston Calipers or MFG 6 Piston Calipers
Comes with Drilled & Slotted RotorsFITS WILWOOD ALUMINUM PROSPINDLE ONLY (NOT INCLUDED)
Learn More$2,455.00 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 12" Rotors - 140-15302Wilwood Forged Narrow Superlite 6R Front Brake Kit
12.19" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
15" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 PRO SPINDLES
Learn MoreAs low as $1,089.49 -
![]()
Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit, 12.88" Rotors - 140-9219Wilwood Forged Narrow Superlite 4R Rear Big Brake Kit
12.88" Rotors, SRP Drilled & Slotted Available
4 Piston Calipers, Red or Black Available
Big Ford New Style Rear End Axle Flange (Torino), 2.50 Offset
17" Minimum Wheel Diameter Learn MoreAs low as $1,947.24 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 13" Rotors - 140-15303Wilwood Forged Narrow Superlite 6R Front Brake Kit
13.06" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
17" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 PRO SPINDLES
Learn MoreAs low as $1,834.74 -
![]()
Wilwood Forged Narrow Superlite 6R Front Brake Kit, 14" Rotors - 140-15304Wilwood Forged Narrow Superlite 6R Front Brake Kit
14" Rotors, SRP Drilled & Slotted Available
6 Piston Calipers, Red or Black Available
18" Minimum Wheel Diameter* FOR USE WITH WILWOOD C10 PRO SPINDLES
Learn MoreAs low as $2,118.49 -
![]()
Hooker Headers #2466HKR - SBC HeadersCompatible with Level 1-3 Dropmember equipped trucks running a SBC engine.
NOT COMPATIBLE WITH THE VERSION 7 DROPMEMBER.
We DO NOT stock these headers. They can be purchased here:
Learn More
http://www.summitracing.com/parts/hok-2466hkr.$179.95 -
![]()
Low Profile LSX Swap Oil Pan Kit, F-BodyLow Profile Oil Pan Kit
LSX Engine, F-Body Oil Pan
Fits 4.8L, 5.3L, 6.0L, 6.2L
Dropmember Compatible Learn More$349.00 -
![]()
Hedman Headers #65103 - BBC HeadersCompatible with Level 2 and Level 3 Dropmember equipped trucks running a BBC engine.
We DO NOT stock these headers. They can be purchased here:
Learn More
http://www.summitracing.com/parts/hed-65103.$269.97 -
![]()
1963-72 Stage 2 Deluxe Rear Kit - CoiloversThe Porterbuilt Stage 2 Rear “Deluxe” Kit for 63-72 C10 is an engineered bolt-in suspension system designed to lower your truck as low as possible while maintaining the factory bed floor. The Stage 2 “Deluxe” is just that, it replaces all the factory crossmembers (from the trailing arm cross-member back) with tubular versions that are designed to bolt right in! It also includes our fully adjustable trac bar for improved handling and performance. If you are looking for the best possible kit to lower your C10 and keep the bed-floor in tact… this is the one!
Learn More$2,199.00 -
![]()
1961-64 Ford F100 Rear DropmemberThe Porterbuilt Level 3 61-64 Ford F100 Rear suspension system is a modular suspension system engineered to lay body with large diameter wheel/tire combinations. (Recommended to run no wider than a 10” wheel)
Learn More$2,399.00
Filter
Shopping Options