Chassis / Suspension

Desc
per page

Items 81-100 of 109

View as List Grid
  1. Porterbuilt C30 Tubular Control Arms Factory Crossmember, 1" Forward & 1" Narrowed
    $1,099.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    C30 SPECIFIC

  2. 1963-72 Chevy Pickup Rear Dropmember , Level 1 Airbag
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

  3. 1963-72 Chevy Pickup Front Dropmember, Level 1 Airbag
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

  4. Porterbuilt C30 Tubular Control Arms Factory Crossmember, Standard Length
    $1,099.00

    Porterbuilt tubular control arms are built using thick-wall DOM tubing and CNC cut 3/16" pickeled plate steel. All bushing pivot tubes and ball joint cups are TIG welded.

    Includes upper and lower shafts, bushings, and Grade 8 hardware for installation.

    C30 SPECIFIC

  5. 1963-72 Chevy Pickup Rear Dropmember , Level 3 Airbag
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 3 Airbag Dropmember suspension system is engineered to lay frame with large diameter wheel/tire combinations.

    Ride Height - 4"
    Deflated Height - Lay Frame

  6. 1963-72 Chevy Pickup Front Dropmember, Level 3 Airbag
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  7. 1963-72 Chevy Pickup Front Dropmember, Level 1 Coilover
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will set the bottom of the cab approx. 7-9" inches off the ground at ride height.

    Ride Height - 7-9"

  8. 1963-72 Chevy Pickup Rear Back Half Kit, Level 3 Airbag
    $3,499.00

    The Dropmember Rear Back Half suspension system is engineered to lay frame with a 15" wide wheel.
    Level 3, Extreme
    Ride height measures approx. 5” when running a 30” tall tire, and the frame will rest on the ground when deflated.

    DESIGNED FOR 15" WIDE WHEELS
    LONG BED TO SHORT BED CONVERSION


  9. 1963-70 C10 Ball Joints
    $99.00
    Performance Ball Joints for 1963-70 Chevy C10
    Includes 2 upper and 2 lower ball joints.
  10. 1963-72 Chevy Pickup Rear Dropmember, Level 1 Coilovers
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7-9"

  11. 1963-72 Chevy Pickup Front Dropmember, Level 2 Coilover
    $1,299.00

    The 1963-72 Chevy Pickup Front Dropmember Coilover suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 2 Front will set the bottom of the cab approx. 4-6" inches off the ground at ride height.

    Ride Height - 4-6"

  12. 1971-72 C10 Ball Joints
    $119.00
    Performance Ball Joints for 1963-70 Chevy C10
    Includes 2 upper and 2 lower ball joints
  13. 1973-87 Chevy Pickup Front Dropmember, Level 1 Airbag
    $1,299.00

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 1 Front will the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

    Ride Height - 6-7"
    Deflated Height - 3"

  14. 1963-72 Chevy Pickup Rear Dropmember, Level 2 Coilovers
    $2,299.00

    The 1963-72 Chevy Pickup Rear Level 2 Coilover Dropmember suspension system is engineered to improve ride quality, performance, aesthetics, and strength.

    Ride Height - 4-6"

  15. 1973-87 C10 Ball Joints
    $109.00

    Performance Ball Joints for 1963-70 Chevy C10

  16. 1973-87 Chevy C30 Front Dropmember, Level 3 Airbag
    $1,499.00

    The 1973-87 Chevy C30 Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with our C30 specific 3” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  17. C30 Ball Joints
    $229.00
    Performance Ball Joints for Chevy C30
    Includes 2 upper and 2 lower ball joints.
  18. 1973-87 Chevy Pickup Front Dropmember, Level 3 Airbag
    $1,299.00

    The 1973-87 Chevy Pickup Front Dropmember suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding.
    When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    Ride Height - 4"
    Deflated Height - Lay Frame

  19. 1973-87 Chevy Pickup Rear Dropmember , Level 1 Airbag
    $2,299.00

    The 1973-87 Chevy Pickup Rear Level 1 Airbag Dropmember suspension system is designed to replace the factory components and improve ride quality, performance, aesthetics, and strength.

    Ride Height - 7"
    Deflated Height - 3"

Desc
per page

Items 81-100 of 109

View as List Grid
To Top